plasma torch controller

1. Newest cap THC in 2012 2. Support DC 24V motor 3. stand alone THC 4. Model: CHC-200E CHC-200DII has updated to CHC-200E since Feb,2012.Our THC is stand alone type,  it can support any CNC controller,  like EDGE, Buny controllers.... Flashcut, MACH3 controller,   or China  Microstep from beijing,  Adtech controller.......just give us your controller manual, we will wire it for you.We can support your plasma wiring too.....Just give us a manual of your product.......we will make one-stop solution for you. 

Power supply

CHC-200E---   AC24V±10%,50Hz/60Hz,

Output current

CHC-200E---    1A-4A,max---100W,

Work temperature      THC-10--60°C,

HF cable: -10--200°C,

Sensor parts:10--350°C.

Accuracy: ±0.1mm (matters with lifter design),

Auto height range: from cutting material surface 1mm — 20mm.

HF-cable:200mm---1300mm.

Compare to old CHC-200D, NEW CHC-200E has new features as follow,

1,         Increased more indicators to shows different states of THC.

2,         Output of collision-alarm, which is optical isolation output from THC, can be sent to CNC’s Alarm input to freeze machine’s move. This signal is effective on both manual/auto mode. The max output is 200mA, capable to drive most relays.

3,         Anti-collision function. On manual/auto mode, when metal or low-conductive item like hand touches sensor ring, THC would send out collision signal and lift torch up until no collision exist.

4,        When HF cable is disconnected or weakly connected, it would be indicated on the disconnection indicator. So after installation of HF cable, just shake the HF cable, the connection will be showed by the indicator.

5,         Sensitive and Accuracy is increased 100%.

6,         CHC200E uses digital logic control circuit for logic control, greatly improved anti-interference performance.

   New CHC-200E as below, 

plasma torch controller